1.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     1.2 +++ b/CppApplication_1/.dep.inc	Sun Jan 05 13:43:45 2014 -0800
     1.3 @@ -0,0 +1,5 @@
     1.4 +# This code depends on make tool being used
     1.5 +DEPFILES=$(wildcard $(addsuffix .d, ${OBJECTFILES}))
     1.6 +ifneq (${DEPFILES},)
     1.7 +include ${DEPFILES}
     1.8 +endif

     2.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     2.2 +++ b/CppApplication_1/Makefile	Sun Jan 05 13:43:45 2014 -0800
     2.3 @@ -0,0 +1,128 @@
     2.4 +#
     2.5 +#  There exist several targets which are by default empty and which can be 
     2.6 +#  used for execution of your targets. These targets are usually executed 
     2.7 +#  before and after some main targets. They are: 
     2.8 +#
     2.9 +#     .build-pre:              called before 'build' target
    2.10 +#     .build-post:             called after 'build' target
    2.11 +#     .clean-pre:              called before 'clean' target
    2.12 +#     .clean-post:             called after 'clean' target
    2.13 +#     .clobber-pre:            called before 'clobber' target
    2.14 +#     .clobber-post:           called after 'clobber' target
    2.15 +#     .all-pre:                called before 'all' target
    2.16 +#     .all-post:               called after 'all' target
    2.17 +#     .help-pre:               called before 'help' target
    2.18 +#     .help-post:              called after 'help' target
    2.19 +#
    2.20 +#  Targets beginning with '.' are not intended to be called on their own.
    2.21 +#
    2.22 +#  Main targets can be executed directly, and they are:
    2.23 +#  
    2.24 +#     build                    build a specific configuration
    2.25 +#     clean                    remove built files from a configuration
    2.26 +#     clobber                  remove all built files
    2.27 +#     all                      build all configurations
    2.28 +#     help                     print help mesage
    2.29 +#  
    2.30 +#  Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
    2.31 +#  .help-impl are implemented in nbproject/makefile-impl.mk.
    2.32 +#
    2.33 +#  Available make variables:
    2.34 +#
    2.35 +#     CND_BASEDIR                base directory for relative paths
    2.36 +#     CND_DISTDIR                default top distribution directory (build artifacts)
    2.37 +#     CND_BUILDDIR               default top build directory (object files, ...)
    2.38 +#     CONF                       name of current configuration
    2.39 +#     CND_PLATFORM_${CONF}       platform name (current configuration)
    2.40 +#     CND_ARTIFACT_DIR_${CONF}   directory of build artifact (current configuration)
    2.41 +#     CND_ARTIFACT_NAME_${CONF}  name of build artifact (current configuration)
    2.42 +#     CND_ARTIFACT_PATH_${CONF}  path to build artifact (current configuration)
    2.43 +#     CND_PACKAGE_DIR_${CONF}    directory of package (current configuration)
    2.44 +#     CND_PACKAGE_NAME_${CONF}   name of package (current configuration)
    2.45 +#     CND_PACKAGE_PATH_${CONF}   path to package (current configuration)
    2.46 +#
    2.47 +# NOCDDL
    2.48 +
    2.49 +
    2.50 +# Environment 
    2.51 +MKDIR=mkdir
    2.52 +CP=cp
    2.53 +CCADMIN=CCadmin
    2.54 +
    2.55 +
    2.56 +# build
    2.57 +build: .build-post
    2.58 +
    2.59 +.build-pre:
    2.60 +# Add your pre 'build' code here...
    2.61 +
    2.62 +.build-post: .build-impl
    2.63 +# Add your post 'build' code here...
    2.64 +
    2.65 +
    2.66 +# clean
    2.67 +clean: .clean-post
    2.68 +
    2.69 +.clean-pre:
    2.70 +# Add your pre 'clean' code here...
    2.71 +
    2.72 +.clean-post: .clean-impl
    2.73 +# Add your post 'clean' code here...
    2.74 +
    2.75 +
    2.76 +# clobber
    2.77 +clobber: .clobber-post
    2.78 +
    2.79 +.clobber-pre:
    2.80 +# Add your pre 'clobber' code here...
    2.81 +
    2.82 +.clobber-post: .clobber-impl
    2.83 +# Add your post 'clobber' code here...
    2.84 +
    2.85 +
    2.86 +# all
    2.87 +all: .all-post
    2.88 +
    2.89 +.all-pre:
    2.90 +# Add your pre 'all' code here...
    2.91 +
    2.92 +.all-post: .all-impl
    2.93 +# Add your post 'all' code here...
    2.94 +
    2.95 +
    2.96 +# build tests
    2.97 +build-tests: .build-tests-post
    2.98 +
    2.99 +.build-tests-pre:
   2.100 +# Add your pre 'build-tests' code here...
   2.101 +
   2.102 +.build-tests-post: .build-tests-impl
   2.103 +# Add your post 'build-tests' code here...
   2.104 +
   2.105 +
   2.106 +# run tests
   2.107 +test: .test-post
   2.108 +
   2.109 +.test-pre:
   2.110 +# Add your pre 'test' code here...
   2.111 +
   2.112 +.test-post: .test-impl
   2.113 +# Add your post 'test' code here...
   2.114 +
   2.115 +
   2.116 +# help
   2.117 +help: .help-post
   2.118 +
   2.119 +.help-pre:
   2.120 +# Add your pre 'help' code here...
   2.121 +
   2.122 +.help-post: .help-impl
   2.123 +# Add your post 'help' code here...
   2.124 +
   2.125 +
   2.126 +
   2.127 +# include project implementation makefile
   2.128 +include nbproject/Makefile-impl.mk
   2.129 +
   2.130 +# include project make variables
   2.131 +include nbproject/Makefile-variables.mk

     3.1 Binary file CppApplication_1/build/Debug/GNU-Linux-x86/first.o has changed

     4.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     4.2 +++ b/CppApplication_1/build/Debug/GNU-Linux-x86/first.o.d	Sun Jan 05 13:43:45 2014 -0800
     4.3 @@ -0,0 +1,34 @@
     4.4 +build/Debug/GNU-Linux-x86/first.o: first.cpp \
     4.5 + /usr/local/include/js/jsapi.h /usr/local/include/js/js-config.h \
     4.6 + /usr/local/include/js/jspubtd.h /usr/local/include/js/jstypes.h \
     4.7 + /usr/local/include/js/jsautocfg.h /usr/local/include/js/jsinttypes.h \
     4.8 + /usr/local/include/js/jsotypes.h /usr/local/include/js/jscompat.h \
     4.9 + /usr/local/include/js/jslong.h /usr/local/include/js/jsval.h \
    4.10 + /usr/local/include/js/jsutil.h /usr/local/include/js/jsproto.tbl \
    4.11 + /usr/local/include/js/jsversion.h
    4.12 +
    4.13 +/usr/local/include/js/jsapi.h:
    4.14 +
    4.15 +/usr/local/include/js/js-config.h:
    4.16 +
    4.17 +/usr/local/include/js/jspubtd.h:
    4.18 +
    4.19 +/usr/local/include/js/jstypes.h:
    4.20 +
    4.21 +/usr/local/include/js/jsautocfg.h:
    4.22 +
    4.23 +/usr/local/include/js/jsinttypes.h:
    4.24 +
    4.25 +/usr/local/include/js/jsotypes.h:
    4.26 +
    4.27 +/usr/local/include/js/jscompat.h:
    4.28 +
    4.29 +/usr/local/include/js/jslong.h:
    4.30 +
    4.31 +/usr/local/include/js/jsval.h:
    4.32 +
    4.33 +/usr/local/include/js/jsutil.h:
    4.34 +
    4.35 +/usr/local/include/js/jsproto.tbl:
    4.36 +
    4.37 +/usr/local/include/js/jsversion.h:

     5.1 Binary file CppApplication_1/dist/Debug/GNU-Linux-x86/cppapplication_1 has changed

     6.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     6.2 +++ b/CppApplication_1/first.cpp	Sun Jan 05 13:43:45 2014 -0800
     6.3 @@ -0,0 +1,176 @@
     6.4 +/* 
     6.5 + * File:   first.cpp
     6.6 + * Author: sara
     6.7 + *
     6.8 + * Created on December 30, 2013, 11:41 AM
     6.9 + */
    6.10 +
    6.11 +#include <cstdlib>
    6.12 +/* Include the JSAPI header file to get access to SpiderMonkey. */
    6.13 +#include "jsapi.h"
    6.14 +#include <pthread.h>
    6.15 +
    6.16 +using namespace std;
    6.17 +struct thread_parameter
    6.18 +{
    6.19 + // char *uncompiledScript;
    6.20 +   // JSObject *sharedGlobalObject;
    6.21 +   // JSRuntime *currRt;
    6.22 +    char *tempstr;
    6.23 +   
    6.24 +
    6.25 +};
    6.26 +/* The class of the global object. */
    6.27 +JSRuntime *rt;
    6.28 +JSObject  *global;
    6.29 +static JSClass global_class = {
    6.30 +    "global", JSCLASS_GLOBAL_FLAGS,
    6.31 +    JS_PropertyStub, JS_PropertyStub, JS_PropertyStub, JS_StrictPropertyStub,
    6.32 +    JS_EnumerateStub, JS_ResolveStub, JS_ConvertStub, JS_FinalizeStub,
    6.33 +    JSCLASS_NO_OPTIONAL_MEMBERS
    6.34 +};
    6.35 +
    6.36 +/* The error reporter callback. */
    6.37 +void reportError(JSContext *cx, const char *message, JSErrorReport *report)
    6.38 +{
    6.39 +    fprintf(stderr, "%s:%u:%s\n",
    6.40 +            report->filename ? report->filename : "<no filename=\"filename\">",
    6.41 +            (unsigned int) report->lineno,
    6.42 +            message);
    6.43 +}
    6.44 +/** the function which the thread executes when is created at main 
    6.45 + *@parameter structure of all the argument the function needs
    6.46 + *@return return null at the end 
    6.47 +*/ 
    6.48 +void *threadFunction(void* arg){
    6.49 + /* indicates that the execution of the script is executed successfully or not*/
    6.50 + bool execute;
    6.51 + int temp = 1;
    6.52 +// char *script = "'Hi' + 'Sara'";
    6.53 + char threadScript[] = "'Hi ' + 'Sara!'";
    6.54 + char *scr = threadScript;
    6.55 +  JSString *outStr;
    6.56 +/* carries the value of the last expression of the script*/
    6.57 + jsval rval1;
    6.58 + 
    6.59 +/* The new context which is created by the thread*/
    6.60 +  JSContext *currContext;
    6.61 +/* pass the incoming argument of the function */
    6.62 +// struct thread_parameter *arg1 = (struct thread_parameter *) arg;
    6.63 +//const char *uncScript = (const char*)arg->uncompiledScript;
    6.64 +  //scr = (char *)arg;
    6.65 +/*Creates new context to be attached to the creator thread*/ 
    6.66 +currContext = JS_NewContext(rt, 8192);
    6.67 +  if (currContext == NULL)
    6.68 +       return NULL;
    6.69 +/* In a thread safe build every entry to the api that uses
    6.70 +   context must be in a request for thread safety*/
    6.71 +  JS_BeginRequest(currContext);
    6.72 +   JS_SetOptions(currContext, JSOPTION_VAROBJFIX | JSOPTION_JIT | JSOPTION_METHODJIT);
    6.73 +   JS_SetVersion(currContext, JSVERSION_LATEST);
    6.74 +/*Compiles the incoming script*/
    6.75 +  JSObject *compiledScript = JS_CompileScript(currContext, global, scr,strlen(scr), "threadFilename", 0);
    6.76 +/*Executes the compiled script*/
    6.77 +   execute = JS_ExecuteScript(currContext, global, compiledScript, &rval1);
    6.78 +      if ( rval1 == JS_FALSE)//rval == JS_NULL |
    6.79 +        return NULL;
    6.80 +    /*gets the returned value of the last expression of the executed script*/
    6.81 +    outStr = JS_ValueToString(currContext, rval1);
    6.82 +    printf("%s\n", JS_EncodeString(currContext, outStr));
    6.83 +/*Ends the request */
    6.84 +    JS_EndRequest(currContext);
    6.85 +/*Destroy the context of that thread*/
    6.86 +     JS_DestroyContext(currContext);
    6.87 + //printf("HI, Sara");
    6.88 +    return NULL;
    6.89 +    
    6.90 +}
    6.91 +/*
    6.92 + * 
    6.93 + */
    6.94 +int main(int argc, const char *argv[]) {
    6.95 +
    6.96 +     /* JSAPI variables. */
    6.97 +    //JSRuntime *rt;
    6.98 +    JSContext *cx;
    6.99 +   // JSObject  *global;
   6.100 +/* id of the created thread*/
   6.101 +    pthread_t thread_id;
   6.102 +
   6.103 +    /* Create a JS runtime. You always need at least one runtime per process. */
   6.104 +    rt = JS_NewRuntime(8 * 1024 * 1024);
   6.105 +    if (rt == NULL)
   6.106 +        return 1;
   6.107 +
   6.108 +    /* 
   6.109 +     * Create a context. You always need a context per thread.
   6.110 +     * Note that this program is not multi-threaded.
   6.111 +     This thread is used by the main thread only
   6.112 +     */
   6.113 +    cx = JS_NewContext(rt, 8192);
   6.114 +    if (cx == NULL)
   6.115 +        return 1;
   6.116 +    JS_BeginRequest(cx);
   6.117 +    JS_SetOptions(cx, JSOPTION_VAROBJFIX | JSOPTION_JIT | JSOPTION_METHODJIT);
   6.118 +    JS_SetVersion(cx, JSVERSION_LATEST);
   6.119 +    JS_SetErrorReporter(cx, reportError);
   6.120 +
   6.121 +    /*
   6.122 +     * Create the global object in a new compartment.
   6.123 +     * You always need a global object per context.
   6.124 +     */
   6.125 +    
   6.126 +    global = JS_NewCompartmentAndGlobalObject(cx, &global_class, NULL);
   6.127 +    if (global == NULL)
   6.128 +        return 1;
   6.129 +
   6.130 +    /*
   6.131 +     * Populate the global object with the standard JavaScript
   6.132 +     * function and object classes, such as Object, Array, Date.
   6.133 +     */
   6.134 +    if (!JS_InitStandardClasses(cx, global))
   6.135 +        return 1;
   6.136 +
   6.137 +    /* Your application code here. This may include JSAPI calls
   6.138 +     * to create your own custom JavaScript objects and to run scripts.
   6.139 +     *
   6.140 +     * The following example code creates a literal JavaScript script,
   6.141 +     * evaluates it, and prints the result to stdout.
   6.142 +     *
   6.143 +     * Errors are conventionally saved in a JSBool variable named ok.
   6.144 +     */
   6.145 +
   6.146 +
   6.147 +    /** Create the thread here....*/
   6.148 +    struct thread_parameter threadArg;
   6.149 +    //threadArg.sharedGlobalObject = global;
   6.150 +     char threadScript[] = "'Hi ' + 'Sara!'";
   6.151 +    //threadArg.tempstr = threadScript;
   6.152 +    //threadArg.currRt = rt;
   6.153 +   
   6.154 +    pthread_create(&thread_id, NULL, &threadFunction,NULL);
   6.155 +/*****************************************************************/
   6.156 +    const char *script = "'Hello ' + 'World!'";
   6.157 +    jsval rval;
   6.158 +    JSString *str;
   6.159 +    JSBool ok;
   6.160 +    const char *filename = "noname";
   6.161 +    uintN lineno = 0;
   6.162 +    ok = JS_EvaluateScript(cx, global, script, strlen(script),
   6.163 +                           filename, lineno, &rval);
   6.164 +    if ( rval == JS_FALSE)//rval == JS_NULL |
   6.165 +        return 1;
   6.166 +    str = JS_ValueToString(cx, rval);
   6.167 +    printf("%s\n", JS_EncodeString(cx, str));
   6.168 +
   6.169 +    /* End of your application code */
   6.170 +
   6.171 +    /* Clean things up and shut down SpiderMonkey. */
   6.172 +    JS_EndRequest(cx);
   6.173 +    JS_DestroyContext(cx);
   6.174 +    JS_DestroyRuntime(rt);
   6.175 +    JS_ShutDown();
   6.176 +    
   6.177 +    return 0;
   6.178 +}
   6.179 +

     7.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     7.2 +++ b/CppApplication_1/nbproject/Makefile-Debug.mk	Sun Jan 05 13:43:45 2014 -0800
     7.3 @@ -0,0 +1,83 @@
     7.4 +#
     7.5 +# Generated Makefile - do not edit!
     7.6 +#
     7.7 +# Edit the Makefile in the project folder instead (../Makefile). Each target
     7.8 +# has a -pre and a -post target defined where you can add customized code.
     7.9 +#
    7.10 +# This makefile implements configuration specific macros and targets.
    7.11 +
    7.12 +
    7.13 +# Environment
    7.14 +MKDIR=mkdir
    7.15 +CP=cp
    7.16 +GREP=grep
    7.17 +NM=nm
    7.18 +CCADMIN=CCadmin
    7.19 +RANLIB=ranlib
    7.20 +CC=gcc
    7.21 +CCC=g++
    7.22 +CXX=g++
    7.23 +FC=gfortran
    7.24 +AS=as
    7.25 +
    7.26 +# Macros
    7.27 +CND_PLATFORM=GNU-Linux-x86
    7.28 +CND_CONF=Debug
    7.29 +CND_DISTDIR=dist
    7.30 +CND_BUILDDIR=build
    7.31 +
    7.32 +# Include project Makefile
    7.33 +include Makefile
    7.34 +
    7.35 +# Object Directory
    7.36 +OBJECTDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}
    7.37 +
    7.38 +# Object Files
    7.39 +OBJECTFILES= \
    7.40 +	${OBJECTDIR}/first.o
    7.41 +
    7.42 +
    7.43 +# C Compiler Flags
    7.44 +CFLAGS=
    7.45 +
    7.46 +# CC Compiler Flags
    7.47 +CCFLAGS=
    7.48 +CXXFLAGS=
    7.49 +
    7.50 +# Fortran Compiler Flags
    7.51 +FFLAGS=
    7.52 +
    7.53 +# Assembler Flags
    7.54 +ASFLAGS=
    7.55 +
    7.56 +# Link Libraries and Options
    7.57 +LDLIBSOPTIONS=-L/usr/local/lib -lmozjs185-1.0 -lmozjs185 -lpthread
    7.58 +
    7.59 +# Build Targets
    7.60 +.build-conf: ${BUILD_SUBPROJECTS}
    7.61 +	"${MAKE}"  -f nbproject/Makefile-${CND_CONF}.mk ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/cppapplication_1
    7.62 +
    7.63 +${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/cppapplication_1: ${OBJECTFILES}
    7.64 +	${MKDIR} -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}
    7.65 +	${LINK.cc} -o ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/cppapplication_1 ${OBJECTFILES} ${LDLIBSOPTIONS} 
    7.66 +
    7.67 +${OBJECTDIR}/first.o: first.cpp 
    7.68 +	${MKDIR} -p ${OBJECTDIR}
    7.69 +	${RM} $@.d
    7.70 +	$(COMPILE.cc) -g -I/usr/local/include/js -MMD -MP -MF $@.d -o ${OBJECTDIR}/first.o first.cpp
    7.71 +
    7.72 +# Subprojects
    7.73 +.build-subprojects:
    7.74 +
    7.75 +# Clean Targets
    7.76 +.clean-conf: ${CLEAN_SUBPROJECTS}
    7.77 +	${RM} -r ${CND_BUILDDIR}/${CND_CONF}
    7.78 +	${RM} ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/cppapplication_1
    7.79 +
    7.80 +# Subprojects
    7.81 +.clean-subprojects:
    7.82 +
    7.83 +# Enable dependency checking
    7.84 +.dep.inc: .depcheck-impl
    7.85 +
    7.86 +include .dep.inc

     8.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     8.2 +++ b/CppApplication_1/nbproject/Makefile-Release.mk	Sun Jan 05 13:43:45 2014 -0800
     8.3 @@ -0,0 +1,83 @@
     8.4 +#
     8.5 +# Generated Makefile - do not edit!
     8.6 +#
     8.7 +# Edit the Makefile in the project folder instead (../Makefile). Each target
     8.8 +# has a -pre and a -post target defined where you can add customized code.
     8.9 +#
    8.10 +# This makefile implements configuration specific macros and targets.
    8.11 +
    8.12 +
    8.13 +# Environment
    8.14 +MKDIR=mkdir
    8.15 +CP=cp
    8.16 +GREP=grep
    8.17 +NM=nm
    8.18 +CCADMIN=CCadmin
    8.19 +RANLIB=ranlib
    8.20 +CC=gcc
    8.21 +CCC=g++
    8.22 +CXX=g++
    8.23 +FC=gfortran
    8.24 +AS=as
    8.25 +
    8.26 +# Macros
    8.27 +CND_PLATFORM=GNU-Linux-x86
    8.28 +CND_CONF=Release
    8.29 +CND_DISTDIR=dist
    8.30 +CND_BUILDDIR=build
    8.31 +
    8.32 +# Include project Makefile
    8.33 +include Makefile
    8.34 +
    8.35 +# Object Directory
    8.36 +OBJECTDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}
    8.37 +
    8.38 +# Object Files
    8.39 +OBJECTFILES= \
    8.40 +	${OBJECTDIR}/first.o
    8.41 +
    8.42 +
    8.43 +# C Compiler Flags
    8.44 +CFLAGS=
    8.45 +
    8.46 +# CC Compiler Flags
    8.47 +CCFLAGS=
    8.48 +CXXFLAGS=
    8.49 +
    8.50 +# Fortran Compiler Flags
    8.51 +FFLAGS=
    8.52 +
    8.53 +# Assembler Flags
    8.54 +ASFLAGS=
    8.55 +
    8.56 +# Link Libraries and Options
    8.57 +LDLIBSOPTIONS=
    8.58 +
    8.59 +# Build Targets
    8.60 +.build-conf: ${BUILD_SUBPROJECTS}
    8.61 +	"${MAKE}"  -f nbproject/Makefile-${CND_CONF}.mk ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/cppapplication_1
    8.62 +
    8.63 +${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/cppapplication_1: ${OBJECTFILES}
    8.64 +	${MKDIR} -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}
    8.65 +	${LINK.cc} -o ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/cppapplication_1 ${OBJECTFILES} ${LDLIBSOPTIONS} 
    8.66 +
    8.67 +${OBJECTDIR}/first.o: first.cpp 
    8.68 +	${MKDIR} -p ${OBJECTDIR}
    8.69 +	${RM} $@.d
    8.70 +	$(COMPILE.cc) -O2 -MMD -MP -MF $@.d -o ${OBJECTDIR}/first.o first.cpp
    8.71 +
    8.72 +# Subprojects
    8.73 +.build-subprojects:
    8.74 +
    8.75 +# Clean Targets
    8.76 +.clean-conf: ${CLEAN_SUBPROJECTS}
    8.77 +	${RM} -r ${CND_BUILDDIR}/${CND_CONF}
    8.78 +	${RM} ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/cppapplication_1
    8.79 +
    8.80 +# Subprojects
    8.81 +.clean-subprojects:
    8.82 +
    8.83 +# Enable dependency checking
    8.84 +.dep.inc: .depcheck-impl
    8.85 +
    8.86 +include .dep.inc

     9.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
     9.2 +++ b/CppApplication_1/nbproject/Makefile-impl.mk	Sun Jan 05 13:43:45 2014 -0800
     9.3 @@ -0,0 +1,133 @@
     9.4 +# 
     9.5 +# Generated Makefile - do not edit! 
     9.6 +# 
     9.7 +# Edit the Makefile in the project folder instead (../Makefile). Each target
     9.8 +# has a pre- and a post- target defined where you can add customization code.
     9.9 +#
    9.10 +# This makefile implements macros and targets common to all configurations.
    9.11 +#
    9.12 +# NOCDDL
    9.13 +
    9.14 +
    9.15 +# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
    9.16 +# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
    9.17 +# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
    9.18 +# and .clean-reqprojects-conf unless SUB has the value 'no'
    9.19 +SUB_no=NO
    9.20 +SUBPROJECTS=${SUB_${SUB}}
    9.21 +BUILD_SUBPROJECTS_=.build-subprojects
    9.22 +BUILD_SUBPROJECTS_NO=
    9.23 +BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
    9.24 +CLEAN_SUBPROJECTS_=.clean-subprojects
    9.25 +CLEAN_SUBPROJECTS_NO=
    9.26 +CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
    9.27 +
    9.28 +
    9.29 +# Project Name
    9.30 +PROJECTNAME=CppApplication_1
    9.31 +
    9.32 +# Active Configuration
    9.33 +DEFAULTCONF=Debug
    9.34 +CONF=${DEFAULTCONF}
    9.35 +
    9.36 +# All Configurations
    9.37 +ALLCONFS=Debug Release 
    9.38 +
    9.39 +
    9.40 +# build
    9.41 +.build-impl: .build-pre .validate-impl .depcheck-impl
    9.42 +	@#echo "=> Running $@... Configuration=$(CONF)"
    9.43 +	"${MAKE}" -f nbproject/Makefile-${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .build-conf
    9.44 +
    9.45 +
    9.46 +# clean
    9.47 +.clean-impl: .clean-pre .validate-impl .depcheck-impl
    9.48 +	@#echo "=> Running $@... Configuration=$(CONF)"
    9.49 +	"${MAKE}" -f nbproject/Makefile-${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .clean-conf
    9.50 +
    9.51 +
    9.52 +# clobber 
    9.53 +.clobber-impl: .clobber-pre .depcheck-impl
    9.54 +	@#echo "=> Running $@..."
    9.55 +	for CONF in ${ALLCONFS}; \
    9.56 +	do \
    9.57 +	    "${MAKE}" -f nbproject/Makefile-$${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .clean-conf; \
    9.58 +	done
    9.59 +
    9.60 +# all 
    9.61 +.all-impl: .all-pre .depcheck-impl
    9.62 +	@#echo "=> Running $@..."
    9.63 +	for CONF in ${ALLCONFS}; \
    9.64 +	do \
    9.65 +	    "${MAKE}" -f nbproject/Makefile-$${CONF}.mk QMAKE=${QMAKE} SUBPROJECTS=${SUBPROJECTS} .build-conf; \
    9.66 +	done
    9.67 +
    9.68 +# build tests
    9.69 +.build-tests-impl: .build-impl .build-tests-pre
    9.70 +	@#echo "=> Running $@... Configuration=$(CONF)"
    9.71 +	"${MAKE}" -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-tests-conf
    9.72 +
    9.73 +# run tests
    9.74 +.test-impl: .build-tests-impl .test-pre
    9.75 +	@#echo "=> Running $@... Configuration=$(CONF)"
    9.76 +	"${MAKE}" -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .test-conf
    9.77 +
    9.78 +# dependency checking support
    9.79 +.depcheck-impl:
    9.80 +	@echo "# This code depends on make tool being used" >.dep.inc
    9.81 +	@if [ -n "${MAKE_VERSION}" ]; then \
    9.82 +	    echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \
    9.83 +	    echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
    9.84 +	    echo "include \$${DEPFILES}" >>.dep.inc; \
    9.85 +	    echo "endif" >>.dep.inc; \
    9.86 +	else \
    9.87 +	    echo ".KEEP_STATE:" >>.dep.inc; \
    9.88 +	    echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
    9.89 +	fi
    9.90 +
    9.91 +# configuration validation
    9.92 +.validate-impl:
    9.93 +	@if [ ! -f nbproject/Makefile-${CONF}.mk ]; \
    9.94 +	then \
    9.95 +	    echo ""; \
    9.96 +	    echo "Error: can not find the makefile for configuration '${CONF}' in project ${PROJECTNAME}"; \
    9.97 +	    echo "See 'make help' for details."; \
    9.98 +	    echo "Current directory: " `pwd`; \
    9.99 +	    echo ""; \
   9.100 +	fi
   9.101 +	@if [ ! -f nbproject/Makefile-${CONF}.mk ]; \
   9.102 +	then \
   9.103 +	    exit 1; \
   9.104 +	fi
   9.105 +
   9.106 +
   9.107 +# help
   9.108 +.help-impl: .help-pre
   9.109 +	@echo "This makefile supports the following configurations:"
   9.110 +	@echo "    ${ALLCONFS}"
   9.111 +	@echo ""
   9.112 +	@echo "and the following targets:"
   9.113 +	@echo "    build  (default target)"
   9.114 +	@echo "    clean"
   9.115 +	@echo "    clobber"
   9.116 +	@echo "    all"
   9.117 +	@echo "    help"
   9.118 +	@echo ""
   9.119 +	@echo "Makefile Usage:"
   9.120 +	@echo "    make [CONF=<CONFIGURATION>] [SUB=no] build"
   9.121 +	@echo "    make [CONF=<CONFIGURATION>] [SUB=no] clean"
   9.122 +	@echo "    make [SUB=no] clobber"
   9.123 +	@echo "    make [SUB=no] all"
   9.124 +	@echo "    make help"
   9.125 +	@echo ""
   9.126 +	@echo "Target 'build' will build a specific configuration and, unless 'SUB=no',"
   9.127 +	@echo "    also build subprojects."
   9.128 +	@echo "Target 'clean' will clean a specific configuration and, unless 'SUB=no',"
   9.129 +	@echo "    also clean subprojects."
   9.130 +	@echo "Target 'clobber' will remove all built files from all configurations and,"
   9.131 +	@echo "    unless 'SUB=no', also from subprojects."
   9.132 +	@echo "Target 'all' will will build all configurations and, unless 'SUB=no',"
   9.133 +	@echo "    also build subprojects."
   9.134 +	@echo "Target 'help' prints this message."
   9.135 +	@echo ""
   9.136 +

    10.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    10.2 +++ b/CppApplication_1/nbproject/Makefile-variables.mk	Sun Jan 05 13:43:45 2014 -0800
    10.3 @@ -0,0 +1,35 @@
    10.4 +#
    10.5 +# Generated - do not edit!
    10.6 +#
    10.7 +# NOCDDL
    10.8 +#
    10.9 +CND_BASEDIR=`pwd`
   10.10 +CND_BUILDDIR=build
   10.11 +CND_DISTDIR=dist
   10.12 +# Debug configuration
   10.13 +CND_PLATFORM_Debug=GNU-Linux-x86
   10.14 +CND_ARTIFACT_DIR_Debug=dist/Debug/GNU-Linux-x86
   10.15 +CND_ARTIFACT_NAME_Debug=cppapplication_1
   10.16 +CND_ARTIFACT_PATH_Debug=dist/Debug/GNU-Linux-x86/cppapplication_1
   10.17 +CND_PACKAGE_DIR_Debug=dist/Debug/GNU-Linux-x86/package
   10.18 +CND_PACKAGE_NAME_Debug=cppapplication1.tar
   10.19 +CND_PACKAGE_PATH_Debug=dist/Debug/GNU-Linux-x86/package/cppapplication1.tar
   10.20 +# Release configuration
   10.21 +CND_PLATFORM_Release=GNU-Linux-x86
   10.22 +CND_ARTIFACT_DIR_Release=dist/Release/GNU-Linux-x86
   10.23 +CND_ARTIFACT_NAME_Release=cppapplication_1
   10.24 +CND_ARTIFACT_PATH_Release=dist/Release/GNU-Linux-x86/cppapplication_1
   10.25 +CND_PACKAGE_DIR_Release=dist/Release/GNU-Linux-x86/package
   10.26 +CND_PACKAGE_NAME_Release=cppapplication1.tar
   10.27 +CND_PACKAGE_PATH_Release=dist/Release/GNU-Linux-x86/package/cppapplication1.tar
   10.28 +#
   10.29 +# include compiler specific variables
   10.30 +#
   10.31 +# dmake command
   10.32 +ROOT:sh = test -f nbproject/private/Makefile-variables.mk || \
   10.33 +	(mkdir -p nbproject/private && touch nbproject/private/Makefile-variables.mk)
   10.34 +#
   10.35 +# gmake command
   10.36 +.PHONY: $(shell test -f nbproject/private/Makefile-variables.mk || (mkdir -p nbproject/private && touch nbproject/private/Makefile-variables.mk))
   10.37 +#
   10.38 +include nbproject/private/Makefile-variables.mk

    11.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    11.2 +++ b/CppApplication_1/nbproject/Package-Debug.bash	Sun Jan 05 13:43:45 2014 -0800
    11.3 @@ -0,0 +1,75 @@
    11.4 +#!/bin/bash -x
    11.5 +
    11.6 +#
    11.7 +# Generated - do not edit!
    11.8 +#
    11.9 +
   11.10 +# Macros
   11.11 +TOP=`pwd`
   11.12 +CND_PLATFORM=GNU-Linux-x86
   11.13 +CND_CONF=Debug
   11.14 +CND_DISTDIR=dist
   11.15 +CND_BUILDDIR=build
   11.16 +NBTMPDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}/tmp-packaging
   11.17 +TMPDIRNAME=tmp-packaging
   11.18 +OUTPUT_PATH=${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/cppapplication_1
   11.19 +OUTPUT_BASENAME=cppapplication_1
   11.20 +PACKAGE_TOP_DIR=cppapplication1/
   11.21 +
   11.22 +# Functions
   11.23 +function checkReturnCode
   11.24 +{
   11.25 +    rc=$?
   11.26 +    if [ $rc != 0 ]
   11.27 +    then
   11.28 +        exit $rc
   11.29 +    fi
   11.30 +}
   11.31 +function makeDirectory
   11.32 +# $1 directory path
   11.33 +# $2 permission (optional)
   11.34 +{
   11.35 +    mkdir -p "$1"
   11.36 +    checkReturnCode
   11.37 +    if [ "$2" != "" ]
   11.38 +    then
   11.39 +      chmod $2 "$1"
   11.40 +      checkReturnCode
   11.41 +    fi
   11.42 +}
   11.43 +function copyFileToTmpDir
   11.44 +# $1 from-file path
   11.45 +# $2 to-file path
   11.46 +# $3 permission
   11.47 +{
   11.48 +    cp "$1" "$2"
   11.49 +    checkReturnCode
   11.50 +    if [ "$3" != "" ]
   11.51 +    then
   11.52 +        chmod $3 "$2"
   11.53 +        checkReturnCode
   11.54 +    fi
   11.55 +}
   11.56 +
   11.57 +# Setup
   11.58 +cd "${TOP}"
   11.59 +mkdir -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package
   11.60 +rm -rf ${NBTMPDIR}
   11.61 +mkdir -p ${NBTMPDIR}
   11.62 +
   11.63 +# Copy files and create directories and links
   11.64 +cd "${TOP}"
   11.65 +makeDirectory "${NBTMPDIR}/cppapplication1/bin"
   11.66 +copyFileToTmpDir "${OUTPUT_PATH}" "${NBTMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755
   11.67 +
   11.68 +
   11.69 +# Generate tar file
   11.70 +cd "${TOP}"
   11.71 +rm -f ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/cppapplication1.tar
   11.72 +cd ${NBTMPDIR}
   11.73 +tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/cppapplication1.tar *
   11.74 +checkReturnCode
   11.75 +
   11.76 +# Cleanup
   11.77 +cd "${TOP}"
   11.78 +rm -rf ${NBTMPDIR}

    12.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    12.2 +++ b/CppApplication_1/nbproject/Package-Release.bash	Sun Jan 05 13:43:45 2014 -0800
    12.3 @@ -0,0 +1,75 @@
    12.4 +#!/bin/bash -x
    12.5 +
    12.6 +#
    12.7 +# Generated - do not edit!
    12.8 +#
    12.9 +
   12.10 +# Macros
   12.11 +TOP=`pwd`
   12.12 +CND_PLATFORM=GNU-Linux-x86
   12.13 +CND_CONF=Release
   12.14 +CND_DISTDIR=dist
   12.15 +CND_BUILDDIR=build
   12.16 +NBTMPDIR=${CND_BUILDDIR}/${CND_CONF}/${CND_PLATFORM}/tmp-packaging
   12.17 +TMPDIRNAME=tmp-packaging
   12.18 +OUTPUT_PATH=${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/cppapplication_1
   12.19 +OUTPUT_BASENAME=cppapplication_1
   12.20 +PACKAGE_TOP_DIR=cppapplication1/
   12.21 +
   12.22 +# Functions
   12.23 +function checkReturnCode
   12.24 +{
   12.25 +    rc=$?
   12.26 +    if [ $rc != 0 ]
   12.27 +    then
   12.28 +        exit $rc
   12.29 +    fi
   12.30 +}
   12.31 +function makeDirectory
   12.32 +# $1 directory path
   12.33 +# $2 permission (optional)
   12.34 +{
   12.35 +    mkdir -p "$1"
   12.36 +    checkReturnCode
   12.37 +    if [ "$2" != "" ]
   12.38 +    then
   12.39 +      chmod $2 "$1"
   12.40 +      checkReturnCode
   12.41 +    fi
   12.42 +}
   12.43 +function copyFileToTmpDir
   12.44 +# $1 from-file path
   12.45 +# $2 to-file path
   12.46 +# $3 permission
   12.47 +{
   12.48 +    cp "$1" "$2"
   12.49 +    checkReturnCode
   12.50 +    if [ "$3" != "" ]
   12.51 +    then
   12.52 +        chmod $3 "$2"
   12.53 +        checkReturnCode
   12.54 +    fi
   12.55 +}
   12.56 +
   12.57 +# Setup
   12.58 +cd "${TOP}"
   12.59 +mkdir -p ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package
   12.60 +rm -rf ${NBTMPDIR}
   12.61 +mkdir -p ${NBTMPDIR}
   12.62 +
   12.63 +# Copy files and create directories and links
   12.64 +cd "${TOP}"
   12.65 +makeDirectory "${NBTMPDIR}/cppapplication1/bin"
   12.66 +copyFileToTmpDir "${OUTPUT_PATH}" "${NBTMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755
   12.67 +
   12.68 +
   12.69 +# Generate tar file
   12.70 +cd "${TOP}"
   12.71 +rm -f ${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/cppapplication1.tar
   12.72 +cd ${NBTMPDIR}
   12.73 +tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/${CND_PLATFORM}/package/cppapplication1.tar *
   12.74 +checkReturnCode
   12.75 +
   12.76 +# Cleanup
   12.77 +cd "${TOP}"
   12.78 +rm -rf ${NBTMPDIR}

    13.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    13.2 +++ b/CppApplication_1/nbproject/configurations.xml	Sun Jan 05 13:43:45 2014 -0800
    13.3 @@ -0,0 +1,80 @@
    13.4 +<?xml version="1.0" encoding="UTF-8"?>
    13.5 +<configurationDescriptor version="79">
    13.6 +  <logicalFolder name="root" displayName="root" projectFiles="true" kind="ROOT">
    13.7 +    <logicalFolder name="HeaderFiles"
    13.8 +                   displayName="Header Files"
    13.9 +                   projectFiles="true">
   13.10 +    </logicalFolder>
   13.11 +    <logicalFolder name="ResourceFiles"
   13.12 +                   displayName="Resource Files"
   13.13 +                   projectFiles="true">
   13.14 +    </logicalFolder>
   13.15 +    <logicalFolder name="SourceFiles"
   13.16 +                   displayName="Source Files"
   13.17 +                   projectFiles="true">
   13.18 +      <itemPath>first.cpp</itemPath>
   13.19 +    </logicalFolder>
   13.20 +    <logicalFolder name="TestFiles"
   13.21 +                   displayName="Test Files"
   13.22 +                   projectFiles="false"
   13.23 +                   kind="TEST_LOGICAL_FOLDER">
   13.24 +    </logicalFolder>
   13.25 +    <logicalFolder name="ExternalFiles"
   13.26 +                   displayName="Important Files"
   13.27 +                   projectFiles="false"
   13.28 +                   kind="IMPORTANT_FILES_FOLDER">
   13.29 +      <itemPath>Makefile</itemPath>
   13.30 +    </logicalFolder>
   13.31 +  </logicalFolder>
   13.32 +  <projectmakefile>Makefile</projectmakefile>
   13.33 +  <confs>
   13.34 +    <conf name="Debug" type="1">
   13.35 +      <toolsSet>
   13.36 +        <remote-sources-mode>LOCAL_SOURCES</remote-sources-mode>
   13.37 +        <compilerSet>default</compilerSet>
   13.38 +      </toolsSet>
   13.39 +      <compileType>
   13.40 +        <cTool>
   13.41 +          <incDir>
   13.42 +            <pElem>/usr/local/include/js</pElem>
   13.43 +          </incDir>
   13.44 +        </cTool>
   13.45 +        <ccTool>
   13.46 +          <incDir>
   13.47 +            <pElem>/usr/local/include/js</pElem>
   13.48 +          </incDir>
   13.49 +        </ccTool>
   13.50 +        <linkerTool>
   13.51 +          <linkerAddLib>
   13.52 +            <pElem>/usr/local/lib</pElem>
   13.53 +          </linkerAddLib>
   13.54 +          <linkerLibItems>
   13.55 +            <linkerLibLibItem>mozjs185-1.0</linkerLibLibItem>
   13.56 +            <linkerLibLibItem>mozjs185</linkerLibLibItem>
   13.57 +            <linkerLibLibItem>pthread</linkerLibLibItem>
   13.58 +          </linkerLibItems>
   13.59 +        </linkerTool>
   13.60 +      </compileType>
   13.61 +    </conf>
   13.62 +    <conf name="Release" type="1">
   13.63 +      <toolsSet>
   13.64 +        <remote-sources-mode>LOCAL_SOURCES</remote-sources-mode>
   13.65 +        <compilerSet>default</compilerSet>
   13.66 +      </toolsSet>
   13.67 +      <compileType>
   13.68 +        <cTool>
   13.69 +          <developmentMode>5</developmentMode>
   13.70 +        </cTool>
   13.71 +        <ccTool>
   13.72 +          <developmentMode>5</developmentMode>
   13.73 +        </ccTool>
   13.74 +        <fortranCompilerTool>
   13.75 +          <developmentMode>5</developmentMode>
   13.76 +        </fortranCompilerTool>
   13.77 +        <asmTool>
   13.78 +          <developmentMode>5</developmentMode>
   13.79 +        </asmTool>
   13.80 +      </compileType>
   13.81 +    </conf>
   13.82 +  </confs>
   13.83 +</configurationDescriptor>

    14.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    14.2 +++ b/CppApplication_1/nbproject/private/Makefile-variables.mk	Sun Jan 05 13:43:45 2014 -0800
    14.3 @@ -0,0 +1,7 @@
    14.4 +#
    14.5 +# Generated - do not edit!
    14.6 +#
    14.7 +# NOCDDL
    14.8 +#
    14.9 +# Debug configuration
   14.10 +# Release configuration

    15.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    15.2 +++ b/CppApplication_1/nbproject/private/configurations.xml	Sun Jan 05 13:43:45 2014 -0800
    15.3 @@ -0,0 +1,77 @@
    15.4 +<?xml version="1.0" encoding="UTF-8"?>
    15.5 +<configurationDescriptor version="79">
    15.6 +  <projectmakefile>Makefile</projectmakefile>
    15.7 +  <confs>
    15.8 +    <conf name="Debug" type="1">
    15.9 +      <toolsSet>
   15.10 +        <developmentServer>localhost</developmentServer>
   15.11 +        <platform>2</platform>
   15.12 +      </toolsSet>
   15.13 +      <dbx_gdbdebugger version="1">
   15.14 +        <gdb_pathmaps>
   15.15 +        </gdb_pathmaps>
   15.16 +        <gdb_interceptlist>
   15.17 +          <gdbinterceptoptions gdb_all="false" gdb_unhandled="true" gdb_unexpected="true"/>
   15.18 +        </gdb_interceptlist>
   15.19 +        <gdb_options>
   15.20 +          <DebugOptions>
   15.21 +          </DebugOptions>
   15.22 +        </gdb_options>
   15.23 +        <gdb_buildfirst gdb_buildfirst_overriden="false" gdb_buildfirst_old="false"/>
   15.24 +      </dbx_gdbdebugger>
   15.25 +      <gizmo_options version="3">
   15.26 +        <configurationname>GizmoSimple</configurationname>
   15.27 +      </gizmo_options>
   15.28 +      <nativedebugger version="1">
   15.29 +        <engine>gdb</engine>
   15.30 +      </nativedebugger>
   15.31 +      <runprofile version="9">
   15.32 +        <runcommandpicklist>
   15.33 +          <runcommandpicklistitem>"${OUTPUT_PATH}"</runcommandpicklistitem>
   15.34 +        </runcommandpicklist>
   15.35 +        <runcommand>"${OUTPUT_PATH}"</runcommand>
   15.36 +        <rundir></rundir>
   15.37 +        <buildfirst>true</buildfirst>
   15.38 +        <terminal-type>0</terminal-type>
   15.39 +        <remove-instrumentation>0</remove-instrumentation>
   15.40 +        <environment>
   15.41 +        </environment>
   15.42 +      </runprofile>
   15.43 +    </conf>
   15.44 +    <conf name="Release" type="1">
   15.45 +      <toolsSet>
   15.46 +        <developmentServer>localhost</developmentServer>
   15.47 +        <platform>2</platform>
   15.48 +      </toolsSet>
   15.49 +      <dbx_gdbdebugger version="1">
   15.50 +        <gdb_pathmaps>
   15.51 +        </gdb_pathmaps>
   15.52 +        <gdb_interceptlist>
   15.53 +          <gdbinterceptoptions gdb_all="false" gdb_unhandled="true" gdb_unexpected="true"/>
   15.54 +        </gdb_interceptlist>
   15.55 +        <gdb_options>
   15.56 +          <DebugOptions>
   15.57 +          </DebugOptions>
   15.58 +        </gdb_options>
   15.59 +        <gdb_buildfirst gdb_buildfirst_overriden="false" gdb_buildfirst_old="false"/>
   15.60 +      </dbx_gdbdebugger>
   15.61 +      <gizmo_options version="3">
   15.62 +      </gizmo_options>
   15.63 +      <nativedebugger version="1">
   15.64 +        <engine>gdb</engine>
   15.65 +      </nativedebugger>
   15.66 +      <runprofile version="9">
   15.67 +        <runcommandpicklist>
   15.68 +          <runcommandpicklistitem>"${OUTPUT_PATH}"</runcommandpicklistitem>
   15.69 +        </runcommandpicklist>
   15.70 +        <runcommand>"${OUTPUT_PATH}"</runcommand>
   15.71 +        <rundir></rundir>
   15.72 +        <buildfirst>true</buildfirst>
   15.73 +        <terminal-type>0</terminal-type>
   15.74 +        <remove-instrumentation>0</remove-instrumentation>
   15.75 +        <environment>
   15.76 +        </environment>
   15.77 +      </runprofile>
   15.78 +    </conf>
   15.79 +  </confs>
   15.80 +</configurationDescriptor>

    16.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    16.2 +++ b/CppApplication_1/nbproject/private/private.xml	Sun Jan 05 13:43:45 2014 -0800
    16.3 @@ -0,0 +1,8 @@
    16.4 +<?xml version="1.0" encoding="UTF-8"?>
    16.5 +<project-private xmlns="http://www.netbeans.org/ns/project-private/1">
    16.6 +    <data xmlns="http://www.netbeans.org/ns/make-project-private/1">
    16.7 +        <activeConfTypeElem>1</activeConfTypeElem>
    16.8 +        <activeConfIndexElem>0</activeConfIndexElem>
    16.9 +    </data>
   16.10 +    <editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/1"/>
   16.11 +</project-private>

    17.1 --- /dev/null	Thu Jan 01 00:00:00 1970 +0000
    17.2 +++ b/CppApplication_1/nbproject/project.xml	Sun Jan 05 13:43:45 2014 -0800
    17.3 @@ -0,0 +1,25 @@
    17.4 +<?xml version="1.0" encoding="UTF-8"?>
    17.5 +<project xmlns="http://www.netbeans.org/ns/project/1">
    17.6 +    <type>org.netbeans.modules.cnd.makeproject</type>
    17.7 +    <configuration>
    17.8 +        <data xmlns="http://www.netbeans.org/ns/make-project/1">
    17.9 +            <name>CppApplication_1</name>
   17.10 +            <c-extensions/>
   17.11 +            <cpp-extensions>cpp</cpp-extensions>
   17.12 +            <header-extensions/>
   17.13 +            <sourceEncoding>UTF-8</sourceEncoding>
   17.14 +            <make-dep-projects/>
   17.15 +            <sourceRootList/>
   17.16 +            <confList>
   17.17 +                <confElem>
   17.18 +                    <name>Debug</name>
   17.19 +                    <type>1</type>
   17.20 +                </confElem>
   17.21 +                <confElem>
   17.22 +                    <name>Release</name>
   17.23 +                    <type>1</type>
   17.24 +                </confElem>
   17.25 +            </confList>
   17.26 +        </data>
   17.27 +    </configuration>
   17.28 +</project>